|
| Guests can view and read messages in the community forums, but you must register and log in to Deployment Forum before you can post messages. Click Register at the top of this page. Before posting messages, please read the forum guidelines at the bottom of this page. | |
| | Author | Messages | |
St4vr0s
Posts:16
 | | 07/03/2008 12:29 PM |
| Hi, Been using our deployment box for a while but yesterday it started givingme the same error when i try to run the X64 WinPE image. PXE boot fine F12 Choose WinPE (either SP1 X86 or SP1 X64) Whenever I choose X64 as soon as the progress bar is fully loaded it should then load WinPE to take me to Wizard.hta however as soon as the bar completes I get a "windows failed to load error" iastor.sys. I have double checked for a newer update at intel, removed old driver from Out of box drivers, Updated Lab and WDS but still it keeps giving me the error. Any suggestions? Thanks | | | |
| Wodkajus
Posts:3
| | 08/14/2008 7:48 AM |
| The Intel driver WinPE (2.0) is loading is not suited for Vista64. It should be, but it isn't. If you leave it in the driver box because you need it for 32 bit xp intallation, you can modify the .inf file so it seems to be a 32bit driver only. This way WinPE (and in a later moment a Vista64 intallation itself) will not try to use it.
For example:
Original iastor.inf:
[Manufacturer]
%INTEL%=INTEL_HDC,ntamd64
[INTEL_HDC]
%PCI\VEN_8086&DEV_2682&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2682&CC_0104
%PCI\VEN_8086&DEV_27C3&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_27C3&CC_0104
%PCI\VEN_8086&DEV_27C6&CC_0104.DeviceDesc% = iaStor_mobl_Inst_RAID, PCI\VEN_8086&DEV_27C6&CC_0104
%PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2822&CC_0104
%PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStor_mobl_Inst_RAID, PCI\VEN_8086&DEV_282A&CC_0104
[INTEL_HDC.ntamd64]
%PCI\VEN_8086&DEV_2682&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2682&CC_0104
%PCI\VEN_8086&DEV_27C3&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_27C3&CC_0104
%PCI\VEN_8086&DEV_27C6&CC_0104.DeviceDesc% = iaStor_mobl_Inst_RAID, PCI\VEN_8086&DEV_27C6&CC_0104
%PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2822&CC_0104
%PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStor_mobl_Inst_RAID, PCI\VEN_8086&DEV_282A&CC_0104
Modified 32bit only iastor.inf:
[Manufacturer]
%INTEL%=INTEL_HDC
[INTEL_HDC]
%PCI\VEN_8086&DEV_2682&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2682&CC_0104
%PCI\VEN_8086&DEV_27C3&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_27C3&CC_0104
%PCI\VEN_8086&DEV_27C6&CC_0104.DeviceDesc% = iaStor_mobl_Inst_RAID, PCI\VEN_8086&DEV_27C6&CC_0104
%PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStor_Inst_RAID, PCI\VEN_8086&DEV_2822&CC_0104
%PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStor_mobl_Inst_RAID, PCI\VEN_8086&DEV_282A&CC_0104
This workaround helped me a lot.
Make sure you create a backup of the original inf file without making it recognisable as .inf file... otherwise the backup wil just be another driver .inf file.
| | | |
|
| | You are not authorized to post a reply. |
|
| |
ActiveForums 3.7 | |
|  | These forums are a user-supported community for IT professionals to exchange deployment tips, solutions, and techniques. For the benefit of all Deployment Forum members, please observe the following guidelines when posting to these forums: - We reserve the right to remove any message. Our moderators will remove all messages that are not respectful or productive. Profanity, racism, prejudice, and flaming are not tolerated.
- Do not advertise products or services. Our moderators will remove all advertisements or service announcements. Product and service recommendations from active Deployment Forum members are encouraged, however.
- Make sure your question isn't already answered. Before posting questions, search the forums. After ensuring that your questions are unique, post them to the most appropriate forum. This will help reduce noise in the forums.
- Help make the most of each thread. Do not post unrelated messages to a thread. Also, if you've resolved a question outside of these forums, please share the solution with other members by posting it back to the thread.
- Do not share confidential information. Confidential information includes product keys and addresses. Our moderators will edit any message containing confidential information, so double-check messages and their attachments before posting them.
- Post messages using only the English language. For the benefit of all Deployment Forum members, please post your messages using the English language.
We hope that you enjoy using this community. Please submit your comments and feedback on the Comments and Feedback page or post them to the Comments, Feedback forum. |
| |
| |
|