Friday, January 09, 2009
Deployment Forum HomeDeployment Forum ArticlesDeployment Forum Download LibraryDeployment Forum Member BlogsDeployment Forum Community Forums
Community   »   Forums  
Member Login
StandardLiveID


Register
Forgot Password ?

Guests can view and read messages in the community forums, but you must register and log in to Deployment Forum before you can post messages. Click Register at the top of this page. Before posting messages, please read the forum guidelines at the bottom of this page.

Forums > Deployment Solutions > MDT 2008
Subject: Joining Domain Problems
Prev Next
You are not authorized to post a reply.

AuthorMessages
Ton182User is Offline

Posts:2

Send Message
06/27/2008 7:14 AM  

Hello, and first off sorry if this has already been posted.. I have looked through and done a search and could not find anything on this...

We are currently using MDT2008 to deploy a Vista image, we have created a build and captured an image.  During the deployment of the image we experience various issues that we have address, but one that seems to be the thorn in the side...Joining the Domain..

For some reason when it reaches the task sequences to join the domain, it keeps the machine in a work group and we have no idea why.  We already had an Vista image created before using BDD2007 and had no problems, we are using the same code in the task sequencer to add to domain but for some reason this just does not work..

The more buffling issue using just a Windows Vista SP1 WIM this works, but anytime we add the capture image it fails..

Any ideas how to resolve?

 

Jamal IbrahimUser is Offline

Posts:4

Send Message
06/27/2008 8:09 AM  
You are using SMS 2003 to deploy ???? Are you sure your domain, user and password it's correct????

[ ]'s
Jamal Ibrahim
http://jamal-ibrahim.spaces.live.com
JCadavidUser is Offline

Posts:64

Send Message
06/27/2008 9:10 AM  
Try using DOMAIN\User format for your credentials for joining the domain? I ran into that issue too and it worked for me. It was for WinXP SP2, but it's worth a shot.
Ton182User is Offline

Posts:2

Send Message
06/27/2008 9:49 AM  

Currently using MDT 2008, I am testing the deployment method of the capature image.

In the capature I have set up a Task Sequence for the machine to join the domain, the user id and password are correct as these have been tested.

 

JCadavidUser is Offline

Posts:64

Send Message
07/01/2008 1:07 PM  
You can't capture an image that is being joined to the domain. What you should do is 2 task sequences. One to build out the image, but simply join a workgroup and then another that deploys your WIM capture and joins the domain.
C BarrettUser is Offline

Posts:19

Send Message
10/09/2008 8:34 AM  
Hello,

 

I had the same problem & found out from a "Deployment Guy" that you need to use the FQDN.....so for example:

 

test.domain.com

 

rather than just "TEST" (if that's your netbios domain name)

 

Hope this helps


Carl

You are not authorized to post a reply.
Forums > Deployment Solutions > MDT 2008 > Joining Domain Problems



ActiveForums 3.7
Forum Policies
Minimize

These forums are a user-supported community for IT professionals to exchange deployment tips, solutions, and techniques. For the benefit of all Deployment Forum members, please observe the following guidelines when posting to these forums:

  • We reserve the right to remove any message. Our moderators will remove all messages that are not respectful or productive. Profanity, racism, prejudice, and flaming are not tolerated.
  • Do not advertise products or services. Our moderators will remove all advertisements or service announcements. Product and service recommendations from active Deployment Forum members are encouraged, however.
  • Make sure your question isn't already answered. Before posting questions, search the forums. After ensuring that your questions are unique, post them to the most appropriate forum. This will help reduce noise in the forums.
  • Help make the most of each thread. Do not post unrelated messages to a thread. Also, if you've resolved a question outside of these forums, please share the solution with other members by posting it back to the thread.
  • Do not share confidential information. Confidential information includes product keys and addresses. Our moderators will edit any message containing confidential information, so double-check messages and their attachments before posting them.
  • Post messages using only the English language. For the benefit of all Deployment Forum members, please post your messages using the English language.

We hope that you enjoy using this community. Please submit your comments and feedback on the Comments and Feedback page or post them to the Comments, Feedback forum.
Privacy Statement  |  Terms Of Use
© 2007 Jerry Honeycutt