Friday, January 09, 2009
Deployment Forum HomeDeployment Forum ArticlesDeployment Forum Download LibraryDeployment Forum Member BlogsDeployment Forum Community Forums
Community   »   Forums  
Member Login
StandardLiveID


Register
Forgot Password ?

Guests can view and read messages in the community forums, but you must register and log in to Deployment Forum before you can post messages. Click Register at the top of this page. Before posting messages, please read the forum guidelines at the bottom of this page.

Forums > Deployment Solutions > MDT 2008
Subject: Network Drivers
Prev Next
You are not authorized to post a reply.

AuthorMessages
SteveP321User is Offline

Posts:33

Send Message
05/22/2008 4:26 PM  

I am unable to image a couple of PCs (HPdc7700 and 7800) which use the same network driver. I am seeing the error "A connection to the deployment share \\Server\Distribution$ could not be made.etc.) My other models (mostly Broadcom NIC drivers) work fine. This is why I think it's a driver issue.

When I first built the MDT box, I WAS able to image the 7800 and created an image successfully. However, since I have built several other models in the meantime, now when I go back to these models I get the above error. I replaced the Intel driver in the Out of Box folder, updated LAB Distribution Point and even rebuilt the WinPE.wim to WDS. Same results. 

WinPE does contact the server and DHCP does issue an IP. I CAN ping the MDT server from the client and vice verse. If anyone has an ideas around this or how to isolate it, I'd very much appreciate it.
Steve

DietmarUser is Offline

Posts:70

Send Message
05/23/2008 3:10 AM  
Are you sure to use a user with the required rights on share and filesystem?
SteveP321User is Offline

Posts:33

Send Message
05/23/2008 8:41 AM  

As mentioned above, the installs work on several other models PCs. I'm 99% sure they are all Broadcom drivers. The
issue I think is that the MDT is getting confused as to what driver to use.
1. I do get a IP from DHCP
2. I CAN ping MDT server from client and vice verse
3. I CAN image other HP and Dell models with MDT
4. I do have the correct drivers (loaded fresh copy) updated LAB share and updated file.
5. Imported new WinPE.wim file to WDS
Just wanted to be clear about what I have done already and how MDT is behaving in general.

Question, is there a way that I can check to be sure that the Intel Gigabit driver in question is actually in the WinPE.wim file? It is most definitely in the Out of Box drivers folder in the Workbench.

 

You are not authorized to post a reply.
Forums > Deployment Solutions > MDT 2008 > Network Drivers



ActiveForums 3.7
Forum Policies
Minimize

These forums are a user-supported community for IT professionals to exchange deployment tips, solutions, and techniques. For the benefit of all Deployment Forum members, please observe the following guidelines when posting to these forums:

  • We reserve the right to remove any message. Our moderators will remove all messages that are not respectful or productive. Profanity, racism, prejudice, and flaming are not tolerated.
  • Do not advertise products or services. Our moderators will remove all advertisements or service announcements. Product and service recommendations from active Deployment Forum members are encouraged, however.
  • Make sure your question isn't already answered. Before posting questions, search the forums. After ensuring that your questions are unique, post them to the most appropriate forum. This will help reduce noise in the forums.
  • Help make the most of each thread. Do not post unrelated messages to a thread. Also, if you've resolved a question outside of these forums, please share the solution with other members by posting it back to the thread.
  • Do not share confidential information. Confidential information includes product keys and addresses. Our moderators will edit any message containing confidential information, so double-check messages and their attachments before posting them.
  • Post messages using only the English language. For the benefit of all Deployment Forum members, please post your messages using the English language.

We hope that you enjoy using this community. Please submit your comments and feedback on the Comments and Feedback page or post them to the Comments, Feedback forum.
Privacy Statement  |  Terms Of Use
© 2007 Jerry Honeycutt